Blog

Articles NMR-01

MPB Sponsor at ANPEQ 2026

MPB Supports Advanced Training in Radioprotection with ANPEQ – Piacenza, February 4–6, 2026

Continuous training has always been a cornerstone for MPB: we believe that staying up to date and sharing knowledge is essential to grow as professionals and to consistently offer the best to our clie...

Read more
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

CISPR 16-1-4: practical guide to EMC site validation

In the field of electromagnetic compatibility (EMC), the quality of measurements is essential to ensure that devices comply with international regulations. In this context, CISPR 16-1-4 represents the...

Read more
IEEE 299-2006-directive

IEEE 299: The standard for measuring shielding effectiveness

In the field of electromagnetic shielding, ensuring adequate protection against interference is essential for the proper functioning of electronic devices.For this reason, the IEEE 299 standard provid...

Read more
MPB - gabbia di Faraday

Gabbia di Faraday: cos'è, come funziona e a cosa serve

La Gabbia di Faraday, scoperta e testata nel 1836 dall'omonimo chimico e fisico Michael Faraday è un involucro metallico percorso da corrente che scherma elettricamente l'ambiente interno.Lo scienziat...

Read more
SEMS B system installed inside an MRI room for RF shielding effectiveness measurement

Shielding Effectiveness Measurements: traditional system vs SEMS and calibration criteria

The SEMS (Shielding Effectiveness Measurement System) has been designed by MPB to perform attenuation measurements of Faraday cages in the frequency range from 10 kHz to 300 MHz.The system consists of...

Read more

Contact Current

Through studies conducted by the International Commission on Non-Ionizing Radiation Protection ICNIRP, guidelines for EMF exposure have been developed to prevent damage to the health of citizens and w...

Read more
MPB - shielding effectiveness

Shielding effectiveness

Shielding efficiency specifies the ability of a material or structure to reduce or attenuate electromagnetic wave propagation.In environments like MRI or the anechoic chamber, where electromagnetic fi...

Read more
MPB - anechoic chamber

Anechoic Chamber

An anechoic chamber is defined as an enclosed "metal" environment made with a supporting structure of dielectric or conducting material, covered inside with absorbent material.The need in radiated imm...

Read more
MPB - faraday cage

Faraday cage

Faraday Cage was discovered and tested in 1836 by the chemist and physicist of the same name, Micheal Faraday. This is a current-carrying metal enclosure that electrically shields the internal environ...

Read more
MPB - 2013/35/EU Directive

2013/35/EU Directive

European Directive 2013/35/EU, the 20th such directive, is also called the EMF Directive and was approved on June 26, 2013.This legislation presents the minimum safety and health provisions related to...

Read more
Southern National Laboratories (LNS-INFN)

MPB selected by INFN Catania for EMP shielding measurements at the I-LUCE Facility

The National Institute for Nuclear Physics (INFN) in Catania has selected MPB to conduct shielding efficiency measurements within the frequency range of 10 kHz to 6 GHz. These measurements are essenti...

Read more
Gtem-cell-MPB-electronic

GTEM cell in EMC Testing: operation, applications, and NMR-CUBE

We live surrounded by electromagnetic waves. From smartphones to microwave ovens, from networking devices to industrial plants, we are constantly exposed to electromagnetic fields of varying intensity...

Read more
MPB sponsors online course

MPB sponsors online course on occupational electromagnetic field (EMF) exposure

MPB Electronic is proud to sponsor the online training course “Occupational exposure to electromagnetic fields: practical guidelines for risk assessment and case studies”, organized by the Interregion...

Read more
MPB at EMV 2026 Electromagnetic Compatibility

MPB to Exhibit at EMV 2026 – Electromagnetic Compatibility Expo & Conference in Cologne (Germany)

We are pleased to announce that MPB Srl will participate as an exhibitor at EMV 2026, Europe’s leading trade fair dedicated to electromagnetic compatibility (EMC) and electromagnetic measurement and t...

Read more
MPB Participates in A&T Nordest 2025

MPB Participates in A&T Nordest 2025

From October 28th to 30th, MPB will be at AeT Nordest 2025, the key event for the world of Measurements, Testing, and Metrology.An exhibition dedicated to innovation and quality in industrial processe...

Read more
MPB at the AIRP 2025 Conference

MPB at the AIRP 2025 Conference

On October 30th, MPB will participate in the AIRP Annual Conference 2025, the leading Italian event dedicated to radiation protection professionals and the management of ionizing and non-ionizing radi...

Read more
International-standard-61000-4-6

IEC 61000-4-6 Standard: how to test RF conducted immunity

The IEC 61000-4-6 is the international standard that defines conducted immunity tests for disturbances induced by radio-frequency (RF) fields.Its purpose is to verify that electrical and electronic de...

Read more
Smoke detector installation in MRI room

Smoke Detection in MRI Rooms: Fiber Optic Systems for EMI-Free Fire Safety

Smoke detection in magnetic resonance imaging (MRI) environments represents one of the most complex challenges in fire safety within the healthcare sector.Unlike traditional environments, MRI rooms op...

Read more
ISO 17025 Calibration Laboratory

ISO 17025 and accredited calibration: what it really means in the context of electromagnetic fields

In the field of electromagnetic field measurements, discussing calibration without referring to the ISO/IEC 17025 effectively means ignoring the main reference that defines the metrological quality of...

Read more
Test your MRI Room

The importance of a fully non-magnetic tripod in Shielding Effectiveness (SE) measurements

In Shielding Effectiveness (SE) measurements, the reliability of the result does not depend solely on the performance of the instrumentation used, but on the entire measurement system. Every element w...

Read more
MPB at AIRP National Conference 2026

MPB at the AIRP National Conference 2026

MPB Srl will participate in the AIRP National Conference on Radiation Protection 2026, taking place in Naples from 7 to 9 October, with its own exhibition stand.We will be present on 8 Octob...

Read more
Anechoic and Semi-Anechoic Chambers: Differences and Applications

Anechoic and Semi-Anechoic Chambers: Differences and Applications

An anechoic chamber and a semi-anechoic chamber are environments used to perform electromagnetic measurements under controlled conditions. Both can be designed to limit external interference and reduc...

Read more
logo MPB S.r.l.
MPB srl

Via Giacomo Peroni 400/402
00131 Roma (RM)
Tel: +39 0641200744
Fax: +39 0641200653
P.IVA: 05415291003
Pec: mpb_srl@pec.it
RAEE: IT24070000016275

Company info

C.F. and Registration number in the company register of the Court of Rome: 05415291003
Share capital euros 100.000,00 Int. vers.
REA 887876

Social

©2026 MPB S.r.l. All rights reserved.