Blog

Articles D-2

SEMS B system installed inside an MRI room for RF shielding effectiveness measurement

Shielding Effectiveness Measurements: traditional system vs SEMS and calibration criteria

The SEMS (Shielding Effectiveness Measurement System) has been designed by MPB to perform attenuation measurements of Faraday cages in the frequency range from 10 kHz to 300 MHz.The system consists of...

Read more
MPB - shielding effectiveness

Shielding effectiveness

Shielding efficiency specifies the ability of a material or structure to reduce or attenuate electromagnetic wave propagation.In environments like MRI or the anechoic chamber, where electromagnetic fi...

Read more
MPB - anechoic chamber

Anechoic Chamber

An anechoic chamber is defined as an enclosed "metal" environment made with a supporting structure of dielectric or conducting material, covered inside with absorbent material.The need in radiated imm...

Read more
MPB - faraday cage

Faraday cage

Faraday Cage was discovered and tested in 1836 by the chemist and physicist of the same name, Micheal Faraday. This is a current-carrying metal enclosure that electrically shields the internal environ...

Read more
L to R: Mr.Florian Büttiker CTO, Mr André Gut Technical Support Engineer e Jan Bulli Wilkinson CEO Mpb srl

SEMS B: more than shielding effectiveness measurement

The field of electromagnetic shielding is constantly evolving with the introduction of high-performance materials designed to deliver increasingly higher performance. Testing their effectiveness is cr...

Read more
IEEE 299-2006-directive

IEEE 299: The standard for measuring shielding effectiveness

In the field of electromagnetic shielding, ensuring adequate protection against interference is essential for the proper functioning of electronic devices.For this reason, the IEEE 299 standard provid...

Read more
SEMS B mpb anechoic chamber

The limitations of traditional troubleshooting techniques

In the field of magnetic resonance, ensuring electromagnetic shielding effectiveness (Shielding Effectiveness - SE) is essential to prevent interference and ensure optimal performance. However, tradit...

Read more
MPB at EMV 2026 Electromagnetic Compatibility

MPB to Exhibit at EMV 2026 – Electromagnetic Compatibility Expo & Conference in Cologne (Germany)

We are pleased to announce that MPB Srl will participate as an exhibitor at EMV 2026, Europe’s leading trade fair dedicated to electromagnetic compatibility (EMC) and electromagnetic measurement and t...

Read more
MPB Participates in A&T Nordest 2025

MPB Participates in A&T Nordest 2025

From October 28th to 30th, MPB will be at AeT Nordest 2025, the key event for the world of Measurements, Testing, and Metrology.An exhibition dedicated to innovation and quality in industrial processe...

Read more
MPB at the AIRP 2025 Conference

MPB at the AIRP 2025 Conference

On October 30th, MPB will participate in the AIRP Annual Conference 2025, the leading Italian event dedicated to radiation protection professionals and the management of ionizing and non-ionizing radi...

Read more
MPB Sponsor at ANPEQ 2026

MPB Supports Advanced Training in Radioprotection with ANPEQ – Piacenza, February 4–6, 2026

Continuous training has always been a cornerstone for MPB: we believe that staying up to date and sharing knowledge is essential to grow as professionals and to consistently offer the best to our clie...

Read more
Smoke detector installation in MRI room

Smoke Detection in MRI Rooms: Fiber Optic Systems for EMI-Free Fire Safety

Smoke detection in magnetic resonance imaging (MRI) environments represents one of the most complex challenges in fire safety within the healthcare sector.Unlike traditional environments, MRI rooms op...

Read more
Test your MRI Room

The importance of a fully non-magnetic tripod in Shielding Effectiveness (SE) measurements

In Shielding Effectiveness (SE) measurements, the reliability of the result does not depend solely on the performance of the instrumentation used, but on the entire measurement system. Every element w...

Read more
logo MPB S.r.l.
MPB srl

Via Giacomo Peroni 400/402
00131 Roma (RM)
Tel: +39 0641200744
Fax: +39 0641200653
P.IVA: 05415291003
Pec: mpb_srl@pec.it
RAEE: IT24070000016275

Company info

C.F. and Registration number in the company register of the Court of Rome: 05415291003
Share capital euros 100.000,00 Int. vers.
REA 887876

Social

©2026 MPB S.r.l. All rights reserved.